Site is Loading, Please wait...

Subduction forces and flow pattern

Conceptual illustration for the basic forces and mantle flow pattern around subduction zones.

Conceptual illustration for the basic forces and mantle flow pattern around subduction zones. The forces indicated are: F_rp: Ridge push; F_sp: Slab pull; F_nb: Negative Buoyancy of the subducting lithosphere; F_ts: Trench suction. Resisting forces: R_d (c/o) mantle drag; R_s-c: Resistance at the subduction interface; R_b: Bending resistance; R_s: Mantle resistance on the slab; R_r: Mantle resistance on the ridge.

  • Creator: Ágnes Király
  • This version: 19.04.2023
  • License: Attribution-ShareAlike 4.0 International (CC BY-NC-SA 4.0)
  • Specific citation: These graphics by Ágnes Király based on Forsyth and Uyeda (1975) are available via the open-access s-Ink.org repository.
  • Related reference: Forsyth, D., & Uyeda, S. (1975). On the relative importance of the driving forces of plate motion. Geophysical Journal International, 43(1), 163-200.
  • Vector format version
  • Suitable for dark backgrounds
  • Transparent-background version
  • Colour-vision deficiency friendly
  • Readable in black&white

Faulty or missing link? – Please report them via a reply below!

Tectonic and mantle convection regimes

Conceptual illustration of different styles (regimes) of tectonics and mantle convection, which are relevant for rocky planets.

Conceptual illustration of different styles (regimes) of tectonics and mantle convection, which are relevant for rocky planets. A planet in “stagnant-lid” regime is covered by a single plate, without any plate boundaries and little to no surface motion. Today, this is likely the case for Mars. A planet evolving in a “heat-pipe” regime, such as Jupiter’s moon Io, is characterised by vertical channels through the lithosphere through which magma erupts to the surface in the form of volcanism. In a “mobile lid” style planet, the multiple cold surface plates are continuously in motion, often with differing (usually higher) velocities than the mantle below. Earth’s ocean-plate tectonics is a subcategory of such a mobile-lid regime, marked by narrow plate boundaries at which plates are either created or recycled back into the mantle. The “squishy-lid” regime is characterised by a strong surface plate that is regionally weakened and deformed by intrusive magmatism. Venus is commonly considered to be in a squishy-lid mantle regime.

  • Vector format versions
  • Dark-background version
  • Transparent-background version
  • Colour-vision deficiency friendly
  • Readable in black&white

Faulty or missing link? – Please report them via a reply below!

Planetary spheres art

100-km depth contours outline the basic radial compositional structure of the planetary interiors of Earth, Mars, Venus, and Mercury.

No time to visit: 100-km depth contours outline the basic radial compositional structure of the planetary interiors of Earth, Mars, Venus, and Mercury. To know about their interiors, one has to do measurements in their vicinity. If you want to travel there – and land –, it takes some serious time, mainly to adjust your space ship to the body’s particular orbital speed: To travel and land on Mars around 7 months, on Venus about 15 months, and on Mercury a whopping 6.5 years. Artwork is based on the data visualisation from s-ink.org/planetary-spheres.

  • Vector-format version
  • Colour-vision deficiency friendly
  • Readable in black&white

Faulty or missing link? – Please report them via a reply below!

Planetary spheres

The interiors of rocky planets and the Moon represented by 100-km depth contours outlining the basic compositional structure.

The interiors of rocky planets and the Moon represented by 100-km depth contours outlining the basic compositional structure. Represented are the rocky planetary bodies Earth, with its Moon, Mars, Venus, and Mercury.

  • Transparent background
  • Light & dark background versions
  • Individual content versions
  • Vector format version
  • Colour-vision deficiency friendly
  • Readable in black&white

Faulty or missing link? – Please report them via a reply below!

Earth’s mantle heterogeneity theories

Conceptual model sketches for proposed compositional structures of Earth’s mantle, including “Marble cake”, “Thermo-chemical piles”, and “Mid-mantle blobs” theories.

Conceptual model sketches for proposed compositional structures of Earth’s mantle. The “Marble cake” theory emphasises that much of Earth’s mantle is made out of recycled oceanic lithosphere (dark and light) slivers that are preserved throughout the mantle. The “Thermo-chemical piles” theory suggests that intrinsically dense materials may accumulate as piles atop the core–mantle boundary. In particular, the two large low-shear velocity provinces (LLSVPs) in the deep Earth are commonly thought to have resisted mantle mixing due to their thermochemical origin. The “mid-mantle blobs” theory emphasises large, compositionally-different domains that may be located in the mid-mantle of the Earth, with mantle convection being accommodated around them. Red triangles at the surface represent volcanism.

  • Creator: Anna Gülcher
  • This version: 17.12.2022
  • License: Attribution-ShareAlike 4.0 International (CC BY-NC-SA 4.0)
  • Specific citation: These graphics by Anna Gülcher from Gülcher et al. (2021) are available via the open-access s-Ink.org repository.
  • Related reference: Gülcher, A. J. P., Ballmer, M. D., and Tackley, P. J. (2021), Coupled dynamics and evolution of primordial and recycled heterogeneity in Earth’s lower mantle, Solid Earth, 12, 2087–2107, 2021 https://doi.org/10.5194/se-12-2087-2021
  • Vector format versions
  • Separate individual versions
  • Transparent background
  • Colour-vision deficiency friendly
  • Readable in black&white

Faulty or missing link? – Please report them via a reply below!

Earth’s elements

The most common elements inside the planet Earth.

The most common elements inside the planet Earth. The Scientific colour map ‘batlow‘ is used to represent individual elements to all readers.

  • Bar plot versions
  • Black&white versions
  • Transparent background
  • Light & dark background versions
  • Colour-vision deficiency friendly
  • Readable in black&white

Faulty or missing link? – Please report them via a reply below!

Seismic mantle tomography maps

Surface projected global horizontal seismic S-wave velocity anomaly maps for different mantle depths revealing the two large low shear-wave velocity provinces (LLSVPs).

Surface projected global horizontal seismic S-wave velocity anomaly maps for different mantle depths revealing the two large low shear-wave velocity provinces (LLSVPs) below the Pacific (named Jason) and Africa (named Tuzo). Shown is the S10MEAN model based on Doubrovine et al. (2016) averaging 10 tomography models allowing to compare relative variations in S-wave velocity. The Scientific colour map ‘batlow‘ is used to represent data accurately and to all readers.

  • Creator: Fabio Crameri
  • This version: 31.10.2021
  • License: Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)
  • Specific citation: This graphic by Fabio Crameri based on data compiled by Doubrovine et al. (2016) is available via the open-access s-Ink repository.
  • Related references: Doubrovine, P. V., Steinberger, B., and Torsvik, T. H. (2016), A failure to reject: Testing the correlation between large igneous provinces and deep mantle structures with EDF statistics, Geochem. Geophys. Geosyst., 17, 1130– 1163, doi:10.1002/2015GC006044.
  • Alternative depths
  • Alternative map projections
  • Alternative colour map
  • Transparent background
  • Light & dark background versions
  • Perceptually uniform
  • Colour-vision deficiency friendly
  • Readable in black&white

Faulty or missing link? – Please report them via a reply below!

Seismic wave travel paths

A schematic highlighting the travel paths of seismic waves through the Earth’s interior.

A schematic highlighting the travel paths of seismic waves through the Earth’s interior. Seismic waves travelling through the Earth follow a curving path due to changes in composition, pressure, and temperature within the layers of the Earth. They follow the same laws of refraction and reflection at interfaces as others waves. When they encounter boundaries between different media, the waves behave according to Snell’s law, with the resulting angle of refraction across the boundary depending on the velocity difference between the two media. Seismic wave arrivals, and the lack of arrivals of direct S- and P-waves, at distant seismic stations have taught us that there are multiple layers within the Earth.

  • Light & dark versions
  • Vector format
  • Transparent background
  • Colour-vision deficiency friendly
  • Readable in black&white

Faulty or missing link? – Please report them via a reply below!

Earth processes

A schematic highlighting some of the most relevant Earth processes.

A schematic highlighting some of the most relevant Earth processes. Illustrated are an early Earth (without a fully developed solid inner core, left) that evolves into a dynamic, present-day-style Earth (right), which generates and erases geologic records of its transforming states and is now experiencing unprecedented environmental change. The arcuate lines surrounding globe illustrate the protective geomagnetic field that arises from the fluid dynamics within the outer core (light grey, illustrated with curled lines). The solid inner core is shown to scale as a darker grey. The mantle and crust (continental rocks are light brown, ocean floor basalts are dark brown; thicknesses greatly exaggerated, with mantle thickness to scale) is a single system driven by convection within the mantle that arises from radioactive decay of heat-producing elements and the loss of the deeply buried planet’s formational energy through cooling of the core. The lithosphere (crust and coldest mantle) is broken into separating and colliding plates whose distribution influence critical element distribution, earthquakes, volcanism, topography, critical zone, climate, water cycle, biogeochemistry, and biodiversity. The Earth is blanketed in a thin atmosphere (light blue). The profile of a landscape highlights Earth surface processes, the sedimentary record of Earth’s history, human influence, and geohazards to people. Displacement on faults may produce sudden strong earthquakes (creating significant hazards) or develop slowly with virtually imperceptible earthquakes. Landslides and coastal retreat, sea level rise, and tsunamis also present hazards to the coastal community. Uplifted hills will experience weathering (light brown) such that dense bedrock develops porosity and holds moisture and groundwater (light blue) that is exploited by vegetation. Deep groundwater aquifers (blue) are key water resources. Precipitation (blue lines) is returned to the atmosphere by evaporation and transpiration (blue dots) with excess water recharging groundwater or running off. Biologically-mediated gas exchange with the atmosphere occurs across the planet. Older sedimentary rocks (stippled brown) and young to contemporary sediments provide records of Earth’s evolving climate, biogeochemistry, and biodiversity. Humans are acting as geologic agents and affecting Earth processes in many ways, including through climate change (via urbanization, release of greenhouse gases, and vegetation change); nutrient input to terrestrial aquatic systems and the oceans (from agriculture and urban wastewater); changes in erosion and sedimentation (from land use change, dams, and other influences on river flow and sediment load); modification of the geographic distribution of biodiversity (from climate and land use change); and exacerbation of hazards (through rising sea level, more intense storms, land use change, and drought-induced wildland fires).

  • Layered version
  • Vector format
  • Transparent background version
  • Light & dark background versions
  • Colour-vision deficiency friendly
  • Readable in black&white

Faulty or missing link? – Please report them via a reply below!

Exit mobile version
%%footer%%